Heat pump domestic hot water tank WP-200 High-performance with double register

Enamelled domestic hot water cylinder
WP 200, suitable for operation with heat
pumps for efficient and reliable DHW
heating. The double-wound high-
performance heat exchanger guarantees a
very high hot water output with minimal
pressure loss thanks to the excellent
heat transfer. The durable double-layer
enamelling, protected by a magnesium
protective anode, guarantees a high
level of resistance. This tank has
a cleaning flange and connections for
circulation, thermometer and a sensor.
There is also a connection for an
electric heating element for emergency
heating or to use excess PV power.
The 75 mm PU rigid foam insulation
minimises energy losses and maximises
efficiency.

Technical data:
nominal volume: 203 litres
material: steel S235JR
corrosion protection inside: enamelled
height with insulation: 1285 mm
tilted height: 1441 mm
diameter with insulation: 650 mm
weight: 115 kg
max. operating pressure: 10 bar
max. operating temperature: 95 °C

Double coil heat exchanger:
surface: 3.0 m²
capacity top: 18.5 litres
max. operating pressure: 10 bar
max. operating temperature: 110 °C

Connections:
heat exchanger: 2x DN32 (1 1/4")
sensors: 1x DN15 (1/2")
thermometer: 1x DN15 (1/2"), pre-inst.
DHW: 2x DN25 (1")
circulation: 1x DN20 (3/4")
anode: 1x DN32 (1 1/4"), pre-installed
flange: 170/114 mm / bolt circle 145 mm
immersion heater*: 1x DN40 (1 1/2")
*max. installation length: 550 mm

Thermal insulation:
material: solid foam
lambda λ: 0.0235 W/(mK)
thickness: 75 mm +/- 10%
protective sheath: PVC foil silver
fire protection class according to
DIN 4102 for the complete insulation: B2
Standby energy consumption according to
DIN EN 12897:2020-05: 1.03 kWh/24h
standing heat loss: 43 W
energy efficiency class: A

ATTENTION:
yearly maintenance of anode,
retighten flange