Solarbayer Silversun solar package 3 Total gross area: 6,06 m2

Solarbayer SilverSun 2.02 high-
performance flat-plate collector in
vertical design for on-roof and flat-
roof installation, laser-welded copper-
aluminium harp absorber with highly
selective mirotherm® coating, aluminium
frame profile (silver), outgassing-free
rear and side insulation made of highly
compressed mineral wool 30/15 mm, highly
transparent solar safety glass

Technical data:
dimensions HxWxD: 2006x1007x85 mm
gross collector area: 2.02 m²
aperture area: 1.83 m²
connections: 4x copper 22 x 0.7 mm
empty weight: 26.1 kg
collector capacity: 1.3 litres
max. operating pressure: 6 bar
solar safety glass: 3,2 mm
stagnation temperature: 230°C
permissible collector angle: 25 - 65°
series connection: max. 6 collectors

Solar-Keymark and DIN-tested
in accordance with DIN EN 12975

Collector yields and efficiency
according to Solar-Keymark certificate
(011-7S2371F) at the Würzburg site at
medium collector temperature

Annual yield per collector (GTY):
1460 kWh at 25°C (=723 kWh/m²)
962 kWh at 50°C (=476 kWh/m²)
601 kWh at 75°C (=298 kWh/m²)

Annual efficiency (ηa):
58% @25°C / 38% @50°C / 24% @75°C

for the installation of solar panels
(photovoltaic and solar thermal energy).
Suitable for pan tile roofs
such as Frankfurter Pfanne, etc.
base plate 4 mm galvanized quality steel,
hooks 5 mm stainless steel
set consists of: 4 hooks and fastening material

Aluminium profile rail for collector
mounting for SilverSun; 2000 mm

2 x compression fitting 22mm
4 x support sleeve
4 x mounting screw M8x12

2x insulated corrugated stainless steel
hose 1m, 22mm x 3/4"IG
2 x sealing plug 22 mm
1 x compression adapter fitting 22 mm x 3/4" male thread
1 x connection-feeler-T-fitting 22mm x 3/4" male thread
1 x feeler protection hose
1 x shrinking hose
1 x Solarfermit

consisting of:
2x rail connector
8x screws M10x20
8x nut screw with locking teeth

Solar heat transfer fluid
concentrate
for solar thermal collectors
in 10 Liter cans

technical datas (ready mixed)
initial boiling point: >150 Gr.C
density (20 Gr.C): 1,055 g/cm3
pH-value: ca. 7,0 - 8,0

mixture with 50 / 50:
density (20 Gr.C): 1,047 g/cm3
viskosity (20 Gr.C): 68-72 mm2/s
antifreeze: ca. -32,4 Gr.C

Solarbayer membrane-pressurized
expansion tank for closed type solar-,
heating-and refrigrant systems, builded
after UNI EN 9001, DIN certificated,
Certification according to EC-type
examination 97/23/EC for pressure
equipments. Suggested for all water and
glycol mixtures

technical specifications:
volume: 35 liter
pre-pressure: 2,5 bar
connection: DN 20 (3/4")
diameter: 365 mm
height with pedestals: 450 mm
max. operating temperature: -10°C till +140°C
max. operating pressure: 10 bar

The intermediate tank decreases the
temperature of the solar fluid inside
the expansion vessel.
Thus, the expansion vessel's
membrane is protected against
overheating.

technical specification:
capacity: 18 Liter
connection: DN 20 (3/4" AG)
max. operating pressure.: 6 bar
diameter: 270 mm
height: 420 mm

Solarbayer Solar pump station
with circulating pump a-class
Wilo Yonos Para ST25/8 iPWM2
control unit with flow rate adjuster 2-12 l/min.
The completely pre-installed unit is checked for
leak tightness and comes with an air separator
in the flow line, a safety unit with
solar manometer 0-10 bar and safety valve 6 bar,
ball valves with thermometers
and check valves 10 bar (open in 45° position),
flushing device,
high quality EPP insulation box
connection for expansion vessel DN20 3/4"

Technical specification:
- dimensions (WxHxD mm): 277x425x150
- max. operating temperature 110 C
- connections 22 mm clamping ring
- pipe distance 125 mm
- connection: 230V / 50 Hz
- power consumption: 2-75 W
- protection class: IPX4D

Solar controller with graphic display
and ready integrated systems.
Self explanatory operation for a easy
installation.

dimension BxHxT: 115x86x45 mm
protection category IP 40
system voltage 230V (+- 10%), 50-60Hz
power consumption 1,5-2,0 W
3 x sensor input PT1000
1 x output relay 230VAC (on/off)
1 x output PWM or 0-10V

Delivery incl. 2 sensors:
2x collector sensor PT1000 (silicone)

to protect against overvoltage
e.g. to the control system
during thunderstorms

Absorbtion air separator for closed
solar systems up to a maximum
temperature of 200 C and an overpressure
of 10 bar

dimensions with insulation
WxHxD: 113 x 188 x 102mm

with lead sealable shutoff device,
connection and draining
for expansion vessels according to DIN 4751,
for exchanging the expansion vessel with
draining the heating system