Solarbayer CPC NERO Solar kit 8 - tiled roof surface m²: gross 26,08 / aperture 22,64

Solarbayer CPC 18 Nero high-performance
vacuum tube collector in vertical design
for on-roof and flat-roof installation,
integrated return pipe for connection on
one side. High-vacuum coated reflective
CPC mirror, glass tube with vacuum in
double-jacket tubular glass (thermos
flask system) with highly selective
AL-N/AL coating, each tube is individual
passed through according to Tichelmann,
thus lowest hydraulic resistance,
frame profile made of black anodised
aluminium, outgassing-free insulation
made of high-density mineral wool

Technical data:
dimensions HxWxD: 1625x2002x127 mm
gross collector area: 3,25 m ²
aperture area: 2,84 m²
connections: CU 18 x 1.0
empty weight: 63 kg
collector capacity: 2,3 litres
max. operating pressure: 6 bar
number of tubes: 18
glass tubes: Safety glass 58x1500 mm
stagnation temperature: 280°C
permissible collector angle: 15 - 65°
series connection: max. 5 collectors

Solar-Keymark and DIN-tested
in accordance with DIN EN 12975

Collector yields and efficiency
according to Solar-Keymark certificate
(011-7S2704R) at the Würzburg site at
medium collector temperature

Annual yield per collector (GTY):
2305 kWh at 25°C (=709 kWh/m²)
1921 kWh at 50°C (=591 kWh/m²)
1563 kWh at 75°C (=481 kWh/m²)

Annual efficiency (ηa):
57% @25°C / 48% @50°C / 39% @75°C

2x CPC Nero clamp ring piece 3/4" x 22 mm;
1x CPC Nero end curve for back flow
2x clamp ring screwed connection 22 mm;
2x insulated corrugated stainless steel hose 22 mm;
1x sensor protective tube
1x tube solar fermit
1x CPC sensor PT1000 (short sensor element)

2 x VA hooks
2 x clamping claw

for standard mounting
material: aluminium

for the installation of solar panels
(photovoltaic and solar thermal energy).
Suitable for pan tile roofs
such as Frankfurter Pfanne, etc.
base plate 4 mm galvanized quality steel,
hooks 5 mm stainless steel
set consists of: 4 hooks and fastening material

Solar heat transfer fluid
for solar thermal collectors
in 20 Liter cans
ready for use, vaporization
safe special heat transfer fluid
for solar systems

technical datas (ready mixed)
initial boiling point: >150 Gr.C
density (20 Gr.C): 1,066 g/cm3
pH-value: ca. 8,0
Viskosität bei 20 Gr.C: 68-72 mm2/s
antifreeze: ca. -30 Gr.C

Solarbayer Solar pump station
with circulating pump a-class
Wilo Yonos Para ST25/8 iPWM2
control unit with flow rate adjuster 2-12 l/min.
The completely pre-installed unit is checked for
leak tightness and comes with an air separator
in the flow line, a safety unit with
solar manometer 0-10 bar and safety valve 6 bar,
ball valves with thermometers
and check valves 10 bar (open in 45° position),
flushing device,
high quality EPP insulation box
connection for expansion vessel DN20 3/4"

Technical specification:
- dimensions (WxHxD mm): 277x425x150
- max. operating temperature 110 C
- connections 22 mm clamping ring
- pipe distance 125 mm
- connection: 230V / 50 Hz
- power consumption: 2-75 W
- protection class: IPX4D

Multifunktional solar controller with
big graphic display and many ready
integrated systems and optional
features to optimize the solar system.
Self explanatory operation for
easy installation. Integrated
Datalogger including SD card.
Ethernet available for Internet
connection and heat quantity
measurement by VFS Sensor.

dimension BxHxT: 228x180x53 mm
protection category IP 40
system voltage 100-240VAC, 50-60Hz
power consumption 0,5-3,0 W
standby: 0,5 W
8 x sensor input PT1000
2 x input VFS/RPS

2 x relay electronic ELR 230VAC
4 x relay output 230VAC (on/off)
1 x relay potentialfree
2 x PWM output or 0-10V

Delivery incl. 6 sensors:
6x collector sensor PT1000 (silicone)

to protect against overvoltage
e.g. to the control system
during thunderstorms

Solarbayer membrane-pressurized
expansion tank for closed type solar-,
heating-and refrigrant systems, builded
after UNI EN 9001, DIN certificated,
Certification according to EC-type
examination 97/23/EC for pressure
equipments. Suggested for all water and
glycol mixtures

technical specifications:
volume: 80 liter
pre-pressure: 2,5 bar
connection: DN 20 (3/4")
diameter: 410 mm
height with pedestals: 687 mm
max. operating temperature: -10°C till +140°C
max. operating pressure: 10 bar

with lead sealable shutoff device,
connection and draining
for expansion vessels according to DIN 4751,
for exchanging the expansion vessel with
draining the heating system

The intermediate tank decreases the
temperature of the solar fluid inside
the expansion vessel.
Thus, the expansion vessel's
membrane is protected against
overheating.

technical specification:
capacity: 18 Liter
connection: DN 20 (3/4" AG)
max. operating pressure.: 6 bar
diameter: 270 mm
height: 420 mm

Absorbtion air separator for closed
solar systems up to a maximum
temperature of 200 C and an overpressure
of 10 bar

dimensions with insulation
WxHxD: 113 x 188 x 102mm

and heat quantity measurement in solar thermal
and heating systems. Applicable in systems
with higher flow rates even with
aggressive fluids and also with DHW.
Precise measurement
due to direct fluid contact.

Scope of delivery:
sensor incl. fitting and
connecting cable
connections: quick coupling flat-
sealing, with pipe socket 22mm
compression fitting 22mm
2 stop valves

length: 1500 mm